| Author |
Message |
|
macaba
|
Post subject: Tracking down a part...  Posted: Mon Jun 29, 2009 9:32 am |
|
Joined: Mon Jun 29, 2009 9:22 am
Posts: 2
|
|
Hi,
I'm trying to find a spare part, as I fried the one I had! If anyone has one of these in their parts bin or shop, I would love to have it as I had a project 95% finished until this blew (static discharge I suspect)!
It is an accelerometer breakout module and I have a feeling it was designed by the admin here under the brand of Sypath. I'm hoping someone will recognise it!
Thanks,
Macaba
You do not have the required permissions to view the files attached to this post.
|
|
| Top |
|
 |
|
Madrias
|
Post subject: Re: Tracking down a part... Posted: Mon Jun 29, 2009 6:00 pm |
|
Joined: Fri Jun 05, 2009 2:39 am
Posts: 18
|
|
I don't recognize it, but go to the manufacturers website, and try to find it there. Works for me 80% of the time.
|
|
| Top |
|
|
|
macaba
|
Post subject: Re: Tracking down a part... Posted: Tue Jun 30, 2009 9:21 pm |
|
Joined: Mon Jun 29, 2009 9:22 am
Posts: 2
|
I did, and it brought me here! 
|
|
| Top |
|
|
|
richiet737
|
Post subject: Re: Tracking down a part... Posted: Wed Nov 04, 2009 10:03 am |
|
Joined: Tue Nov 03, 2009 12:28 pm
Posts: 3
|
|
I am looking for the datasheet (or just the pinout info) for this module. If anyone has a it I would appreciate a copy. Thanks Rich.
|
|
| Top |
|
|
|
eightdot
|
Post subject: Re: Tracking down a part... Posted: Fri Nov 13, 2009 1:53 pm |
|
Joined: Wed Feb 04, 2009 11:15 am
Posts: 18
|
|
are there any markings on the board ?
|
|
| Top |
|
|
|
richiet737
|
Post subject: Re: Tracking down a part... Posted: Tue Nov 17, 2009 8:27 am |
|
Joined: Tue Nov 03, 2009 12:28 pm
Posts: 3
|
|
Yes SYPATH SYPX1. I am lead to believe that the company SYPATH is owned by the owner of this forum. If this is correct I am a little disappointed by the lack of response.
Rich
|
|
| Top |
|
|
